Product Overview

This high-quality diesel injection stop solenoid (Part Number: 096010-0690 / 0960100690) is a critical component for the fuel injection system of Toyota vehicles, specifically designed for the Hilux model with 2C and 1HD-FT engines. As a direct replacement for the original fuel injector pump solenoid switch, this 12V unit ensures precise fuel cut-off for reliable engine shutdown. We supply this essential part globally to workshops, distributors, and fleet operators across North America, Europe, Southeast Asia, and the Middle East, ensuring minimal downtime for your diesel engine repairs.

Key Features & Benefits

• Direct OEM Replacement: Matches the fit, form, and function of the original part number 096010-0690, ensuring a seamless installation on your fuel injection pump.
• Durable Construction: Manufactured from high-speed steel, this solenoid is built to withstand the high vibration and temperature conditions within the engine bay, providing long-term service life.
• Reliable Shut-Off: Engineered to deliver consistent 12V performance, this stop solenoid guarantees a positive fuel shut-off every time, preventing engine run-on and enhancing safety.
• Rigorous Quality Control: Produced under ISO/TS16949 certified facilities, each unit undergoes strict testing to meet or exceed OE standards for performance and durability.
• Cost-Effective Solution: A high-quality aftermarket alternative to expensive dealer parts, offering significant savings without compromising on reliability.

Technical Specifications

OEM Cross-Reference

This solenoid is a direct replacement for the following OEM numbers:

• 096010-0690 (Main Part Number)
• 0960100690 (Alternate Format)

Note: This part is specifically designed for the injection pump applications listed below. Please verify your existing part number before ordering.

Compatibility

Engine Models:

• Toyota 2C Engine
• Toyota 1HD-FT Engine

Vehicle Applications:

• Toyota Hilux (Diesel variants equipped with 2C or 1HD-FT engines)

This is a standard component for diesel fuel injection pumps on these specific engine platforms. Please confirm your engine code and injection pump model for fitment accuracy.

Global Supply & Distribution

We are a dedicated supplier of diesel engine components with a robust global logistics network. We serve a wide range of international clients, ensuring fast and reliable delivery to major markets including:

• North America: USA, Canada, Mexico
• Europe: UK, Germany, France, Netherlands, Poland
• Asia-Pacific: Japan, Australia, New Zealand, Thailand, Indonesia
• Middle East & Africa: UAE, Saudi Arabia, South Africa, Kenya

Our standard delivery time is 3-35 days, depending on order volume and destination. We offer flexible shipping options via sea, air, or express courier (DHL, FedEx, UPS) to meet your urgent requirements. We handle all export documentation and customs compliance for smooth international transactions.

Quality Assurance

• Certification: Manufactured in an ISO/TS16949 certified facility, ensuring adherence to stringent automotive quality management systems.
• Testing: Each stop solenoid is tested for electrical continuity, resistance, and actuation force to guarantee reliable operation.
• Warranty: We stand behind the quality of our product with a full 12-month warranty against manufacturing defects.

FAQ

Q1: How do I know if this solenoid is compatible with my injection pump?

This solenoid (096010-0690) is specifically designed for fuel injection pumps used on the Toyota 2C and 1HD-FT engines. To confirm compatibility, check the part number on your old solenoid. It should match 096010-0690 or 0960100690. Also, ensure your vehicle utilizes a 12V electrical system.

Q2: What are the common symptoms of a failing stop solenoid?

A failing stop solenoid often causes the engine to not shut off when the ignition key is turned to the “OFF” position. Other symptoms include hard starting, intermittent stalling, or the engine continuing to run (dieseling) after shutdown. If you experience these issues, testing or replacing the stop solenoid is a recommended first step.

Q3: What is the installation procedure for this part?

Installation is straightforward. First, disconnect the negative battery terminal. Locate the solenoid on the fuel injection pump (typically held by two screws or a nut). Disconnect the electrical connector, remove the old solenoid, and install the new one. Reconnect the wiring and battery terminal. Ensure the plunger moves freely before starting the engine. We recommend consulting a professional mechanic if you are unsure about the process.

Our advantages

1.An authorized wholesaler of Isuzu genuine parts, Hino genuine parts, Mitsubishi genuine parts and Mahle parts.

2. We are not only supply genuine parts, but also high quality OEM parts, which are made in China or made in Japan.

3. More than 10 years of experience in machinery parts, professional supply of diesel engine parts.

4. Fast delivery, the fastest can be shipped in one day ,more than 500,000 of different types parts in stock.

5. Scientific ERP system, easy and fast to locate the parts that customer needs.

6. Professional technician checks the parts before delivery, to make sure the parts are correct, usable and defect-free.

Exhibition

Packing&Shipping

1.  Our shipment is by air/sea/express (DHL/FEDEX/TNT/UPS/EMS).

2.  Once we get confirmation of payment, we will ship products in 2 days.

3.  Our packaging is standard export wooden box or others as your requirement.

4. We’ll check and test the products before shipping , and givethe pictures to our customers to confirm.

FAQ

Q1. What is your company major products?

A: Our main products are Liner kit, Piston, Rings, Liner, Gasket kit, Bearing, Injection pump, Nozzle, Water pump, Oil pump,Crankshaft, Turbocharger,Filter, etc.

Q2.What is the MOQ?

A: Normally we can supply any quantity if we have in stock.

Q3. What is your payment term ?

A: We accept Western Union, T/T, Paypal.

Q4. What is the packing ?

A: Carton or wooden case , If you want to put your logo on the packing , We will do it after get your authorization letter.

Q5. When can you deliver products after payment ?

A: By Express ,usually might take 3-4 days ;By Air , Usually take 7-9 days ; By Sea ,usually take 1-2 months .

Q6. What can you do to complete order perfectly ?

A: In the beginning , We will communicate with clients in details to understand what they need .

Before packing , We will check the products and send photos to clients .After confirmation ,

We will packing products well to avoid damage . Once we get tracking number ,

We will send it to customer and keep contact in with clients .