Product Overview

This is a high-quality, remanufactured common rail fuel injector designed for precision fuel delivery in Mitsubishi L200 diesel engines. The part numbers 295050-0890 (Denis) and 1465A367 (Mitsubishi) are fully interchangeable and represent a critical component for restoring engine performance, fuel efficiency, and emissions compliance. Our injectors are sourced and remanufactured in Shandong, China, and are shipped globally to B2B buyers in major markets including North America, Europe, Southeast Asia, the Middle East, and Australia.

Key Features & Benefits

• Precision Remanufacturing: Each unit is fully disassembled, cleaned, and tested to meet OE performance standards for the Mitsubishi 4N15 engine family.
• Improved Fuel Economy: High-precision nozzle calibration ensures optimal spray pattern and atomization, reducing fuel consumption and particulate matter.
• Durable Construction: Manufactured from high-grade steel to withstand extreme injection pressures (up to 2,000 bar) common in common rail systems.
• Plug-and-Play Installation: Direct replacement for OE injectors; no modifications required for fitment on compatible Mitsubishi models.
• Cost-Effective Solution: Remanufactured to OE specs at a fraction of the cost of a new OEM injector, ideal for fleet maintenance and repair shops.

Technical Specifications

OEM Cross-Reference

This injector is a direct replacement for the following OEM and aftermarket part numbers:

• Denis (Common Rail Specialist): 295050-0890
• Mitsubishi OEM: 1465A367
• Additional Cross-References: 295050-0891, 1465A368 (verify with your vehicle’s VIN)

Compatibility

Engine Applications:

• Mitsubishi 4N15 (2.4L MIVEC Turbo Diesel)
• Mitsubishi 4D56 (Applicable variants with common rail systems)

Vehicle Models:

• Mitsubishi L200 (2006-2015, 2015-2023 models with 4N15 engine)
• Mitsubishi Triton (Global name for L200, same engine platform)
• Mitsubishi Montero Sport / Shogun Sport (4N15 engine variants)

Note: Always verify fitment by checking your vehicle’s VIN and existing injector part number before purchase.

Global Supply & Distribution

We provide fast, reliable shipping to B2B customers worldwide. Our logistics network supports:

• Major Markets: North America (USA, Canada, Mexico), Europe (Germany, UK, France, Netherlands), Asia-Pacific (Japan, Australia, New Zealand, Thailand), Middle East (UAE, Saudi Arabia), and Africa (South Africa, Nigeria).
• Shipping Options: Express (DHL, FedEx, UPS) for urgent orders or Sea Freight (FOB/CIF) for bulk shipments to major ports like Los Angeles, Rotterdam, Shanghai, and Dubai.
• Export Experience: Over 10 years of experience in exporting diesel engine components, compliant with international trade regulations and customs documentation.

Quality Assurance

• Manufacturing Standards: Each injector is remanufactured in ISO 9001 certified facilities in Shandong, China.
• Testing: 100% flow-bench tested for opening pressure, spray pattern, and leakage before packaging.
• Warranty: 3-month warranty against manufacturing defects. Post-warranty technical support available.
• Certifications: Products meet or exceed OE specifications for durability and performance.

FAQ

Q1: Will this injector fit my 2018 Mitsubishi L200 with the 4N15 engine?

Yes, this injector (295050-0890 / 1465A367) is a direct OE replacement for the Mitsubishi 4N15 engine used in L200 models from 2015 onwards. However, we recommend verifying your existing injector part number by removing it and checking the stamping, as some model variants may use a different revision.

Q2: What is the installation procedure, and do I need to replace the copper washer?

Installation involves removing the fuel rail, unbolting the old injector, and installing the new one with a new copper washer (not included). It is critical to tighten to the manufacturer’s torque specification (typically 60-70 Nm). We strongly advise using a new high-pressure fuel pipe seal kit and performing a leak test after installation.

Q3: How do I code this injector to my ECU?

Most Mitsubishi L200 models (especially post-2015) require injector coding using a professional diagnostic tool (e.g., MUT-III or equivalent). The injector has a correction code (IQA code) printed on the body. You must enter this code into the engine control unit to ensure balanced fuel delivery and prevent rough idling or DPF issues.

Our advantages

1.An authorized wholesaler of Isuzu genuine parts, Hino genuine parts, Mitsubishi genuine parts and Mahle parts.

2. We are not only supply genuine parts, but also high quality OEM parts, which are made in China or made in Japan.

3. More than 10 years of experience in machinery parts, professional supply of diesel engine parts.

4. Fast delivery, the fastest can be shipped in one day ,more than 500,000 of different types parts in stock.

5. Scientific ERP system, easy and fast to locate the parts that customer needs.

6. Professional technician checks the parts before delivery, to make sure the parts are correct, usable and defect-free.

Exhibition

Packing&Shipping

1.  Our shipment is by air/sea/express (DHL/FEDEX/TNT/UPS/EMS).

2.  Once we get confirmation of payment, we will ship products in 2 days.

3.  Our packaging is standard export wooden box or others as your requirement.

4. We’ll check and test the products before shipping , and givethe pictures to our customers to confirm.

FAQ

Q1. What is your company major products?

A: Our main products are Liner kit, Piston, Rings, Liner, Gasket kit, Bearing, Injection pump, Nozzle, Water pump, Oil pump,Crankshaft, Turbocharger,Filter, etc.

Q2.What is the MOQ?

A: Normally we can supply any quantity if we have in stock.

Q3. What is your payment term ?

A: We accept Western Union, T/T, Paypal.

Q4. What is the packing ?

A: Carton or wooden case , If you want to put your logo on the packing , We will do it after get your authorization letter.

Q5. When can you deliver products after payment ?

A: By Express ,usually might take 3-4 days ;By Air , Usually take 7-9 days ; By Sea ,usually take 1-2 months .

Q6. What can you do to complete order perfectly ?

A: In the beginning , We will communicate with clients in details to understand what they need .

Before packing , We will check the products and send photos to clients .After confirmation ,

We will packing products well to avoid damage . Once we get tracking number ,

We will send it to customer and keep contact in with clients .