Product Overview

This high-quality Diesel CP3 Pump Delivery Valve is a critical component for modern fuel injection systems. Designed to meet or exceed OEM specifications, this valve ensures precise fuel metering and reliable pump performance. As a direct replacement for Bosch CP3 pumps, it is widely used in heavy-duty diesel engines across various applications. Our factory in Shandong, China, specializes in the production of fuel system components, supplying to markets in North America, Europe, Southeast Asia, and the Middle East. With a focus on durability and performance, this part is an ideal solution for repair shops, fleet maintenance, and diesel engine rebuilders.

Key Features & Benefits

• Precision Engineering: Manufactured from High-Speed Steel for superior wear resistance and long service life under high-pressure conditions (up to 1,600 bar).
• 100% Tested Quality: Each delivery valve undergoes rigorous professional testing to ensure leak-free operation and consistent fuel delivery.
• Direct OEM Replacement: Exact fit for Bosch CP3 injection pumps, eliminating the need for modifications or additional adapters.
• Enhanced Fuel Economy: Optimized valve design helps maintain correct injection pressure, contributing to better combustion efficiency and reduced emissions.
• Reliable Performance: Provides stable fuel pressure regulation, reducing the risk of pump failure and engine downtime.

Technical Specifications

OEM Cross-Reference

This delivery valve is a direct replacement for the following OEM and aftermarket part numbers:

• Bosch OEM Numbers: F00N201524, F00N200992
• Pump Application Numbers: 0445010052, 0445010101, 0445010354

Note: These numbers are the primary references for identifying the correct valve. Always verify compatibility with your specific pump model before installation.

Compatibility

This delivery valve is specifically designed for use in Bosch CP3 (Common Rail Pump) fuel injection systems. Typical applications include:

• Engine Models: Used in a wide range of diesel engines from manufacturers like Cummins, Dodge, and other heavy-duty applications that utilize the Bosch CP3 pump platform.
• Vehicle Applications: Compatible with diesel cars, light trucks, and commercial vehicles equipped with CP3 injection pumps manufactured between 2000-2015.
• System: Fuel Injection System (High-Pressure Common Rail).

Global Supply & Distribution

We are a dedicated supplier of diesel engine components with a strong focus on international trade. Our distribution network ensures fast and reliable delivery to major global markets:

• North America: Regular shipments to the USA, Canada, and Mexico via air and sea freight.
• Europe: Efficient logistics to Germany, the UK, France, Italy, and Eastern European countries.
• Asia-Pacific: Direct supply to Japan, South Korea, Australia, and Southeast Asian markets.
• Middle East & Africa: Serving the UAE, Saudi Arabia, South Africa, and Nigeria.
• Shipping: We offer fast delivery within 3-7 days via major carriers like DHL, FedEx, and TNT for urgent orders. Bulk orders are shipped via sea freight to major ports (e.g., Rotterdam, Los Angeles, Shanghai).

Quality Assurance

We are committed to providing high-quality parts that ensure engine reliability and longevity.

• Manufacturing Standards: Our parts are manufactured in ISO 9001-certified facilities, ensuring consistent quality control.
• Testing: Each delivery valve is 100% professionally tested for pressure integrity, sealing, and dimensional accuracy before shipment.
• Warranty: All parts come with a standard 6-month warranty against manufacturing defects. We stand behind the quality of our products.

FAQ

Q1: How do I know if this F00N201524 delivery valve fits my pump?

A: This valve is specifically designed for Bosch CP3 pumps. To confirm fitment, check the pump model number printed on the pump body (e.g., 0445010052). If your pump model is listed in our OEM cross-reference section (0445010052, 0445010101, or 0445010354), this valve will fit. If you are unsure, please contact us with your pump’s full model number and serial number for verification.

Q2: What are the symptoms of a failing delivery valve in a CP3 pump?

A: Common symptoms include: 1) Hard starting or long cranking times. 2) Rough idling or engine misfires. 3) Loss of power under load. 4) Fuel pressure fluctuations or a drop in rail pressure. 5) Fuel leakage from the pump head. If you experience these issues, the delivery valve is a likely suspect and should be inspected or replaced.

Q3: Can this valve be replaced without removing the entire injection pump?

A: In most cases, yes. The delivery valve is located on the pump head (the high-pressure outlet). Replacing it typically involves removing the high-pressure fuel line, unscrewing the valve retainer, and swapping the valve. However, this is a precision component, and the work area must be scrupulously clean to avoid contamination. We recommend having this repair performed by a qualified diesel technician to ensure proper torque and sealing.

Our advantages

1.An authorized wholesaler of Isuzu genuine parts, Hino genuine parts, Mitsubishi genuine parts and Mahle parts.

2. We are not only supply genuine parts, but also high quality OEM parts, which are made in China or made in Japan.

3. More than 10 years of experience in machinery parts, professional supply of diesel engine parts.

4. Fast delivery, the fastest can be shipped in one day ,more than 500,000 of different types parts in stock.

5. Scientific ERP system, easy and fast to locate the parts that customer needs.

6. Professional technician checks the parts before delivery, to make sure the parts are correct, usable and defect-free.

Exhibition

Packing&Shipping

1.  Our shipment is by air/sea/express (DHL/FEDEX/TNT/UPS/EMS).

2.  Once we get confirmation of payment, we will ship products in 2 days.

3.  Our packaging is standard export wooden box or others as your requirement.

4. We’ll check and test the products before shipping , and givethe pictures to our customers to confirm.

FAQ

Q1. What is your company major products?

A: Our main products are Liner kit, Piston, Rings, Liner, Gasket kit, Bearing, Injection pump, Nozzle, Water pump, Oil pump,Crankshaft, Turbocharger,Filter, etc.

Q2.What is the MOQ?

A: Normally we can supply any quantity if we have in stock.

Q3. What is your payment term ?

A: We accept Western Union, T/T, Paypal.

Q4. What is the packing ?

A: Carton or wooden case , If you want to put your logo on the packing , We will do it after get your authorization letter.

Q5. When can you deliver products after payment ?

A: By Express ,usually might take 3-4 days ;By Air , Usually take 7-9 days ; By Sea ,usually take 1-2 months .

Q6. What can you do to complete order perfectly ?

A: In the beginning , We will communicate with clients in details to understand what they need .

Before packing , We will check the products and send photos to clients .After confirmation ,

We will packing products well to avoid damage . Once we get tracking number ,

We will send it to customer and keep contact in with clients .