Product Overview

This high-quality new diesel fuel injector, identified by part numbers 0445120075 and 504128307, is a direct replacement for Case New Holland agricultural and industrial engines. Engineered for precision and durability, this common rail injector is designed to restore peak engine performance and fuel efficiency. We are a global supplier, shipping to major industrial markets across North America, Europe, Asia-Pacific, and the Middle East, ensuring fast and reliable delivery to your workshop or distribution center.

Key Features & Benefits

• OEM Standard Fitment: Manufactured to meet or exceed original equipment specifications for a seamless, bolt-on replacement.
• Enhanced Fuel Efficiency: Precision-engineered nozzle geometry ensures optimal fuel atomization, leading to reduced fuel consumption and lower emissions.
• Superior Durability: Constructed from high-grade stainless steel to withstand extreme pressures and temperatures within the common rail system, ensuring a long service life.
• 100% Professional Testing: Every injector is flow-tested and pressure-calibrated to guarantee consistent performance and reliability out of the box.
• Reduced Downtime: Direct replacement design minimizes installation time, getting your heavy equipment back to work faster.

Technical Specifications

OEM Cross-Reference

This injector is a direct cross-reference for the following original equipment manufacturer (OEM) numbers. Please verify your existing part number against this list to ensure compatibility.

• 0445120075 (Bosch)
• 504128307 (Case New Holland)
• 2855135 (Case New Holland)
• 5801382396 (Iveco)

Compatibility

This injector is specifically designed for the following engine and vehicle applications:

• Engine Models: FPT (Fiat Powertrain Technologies) engines used in Case IH and New Holland equipment.
• Vehicle Applications:
  • Case IH: Maxxum, Puma 6.7
  • New Holland: T6, T7 Series (6.7L engines)
• Engine Codes: For E / IH Maxxum / IH Puma 6.7 T6 / T7 6.7

Global Supply & Distribution

We are a dedicated B2B supplier with a robust global logistics network. We offer worldwide shipping to ensure your operations run smoothly, no matter your location.

• Major Markets: We serve clients extensively in North America, Europe (EU), Southeast Asia, the Middle East, Africa, and Oceania.
• Fast Delivery: We maintain stock in strategic locations to ensure rapid dispatch to major ports like Rotterdam, Shanghai, Los Angeles, and Dubai, as well as direct delivery to industrial centers.
• Export Expertise: With years of experience in international trade, we handle all documentation and compliance requirements for smooth customs clearance.

Quality Assurance

• Manufacturing Standards: Produced in an ISO 9001:2000 and TS 16949 certified facility, ensuring strict adherence to automotive quality standards.
• Warranty: All injectors come with a 6-month warranty against manufacturing defects, providing you with peace of mind.
• Testing: Each unit undergoes 100% professional testing, including flow rate, injection pressure, and spray pattern analysis, to guarantee it meets OEM performance criteria.

FAQ

Q1: How do I verify that injector 0445120075 is the correct fit for my New Holland T7 tractor?
A: First, locate the part number on your old injector. It should match 0445120075 or one of the cross-referenced OEM numbers (504128307, 2855135). Second, verify your engine model. This injector is specifically designed for the FPT 6.7L engine found in the New Holland T6 and T7 series (specifically models around the T7.170, T7.190, etc.). If your engine code matches “IH Puma 6.7 T6/T7 6.7”, this is the correct injector.

Q2: Are these injectors plug-and-play, or do they require coding after installation?
A: These are mechanical replacement injectors. While they are a direct physical fit and do not require electronic coding for the injector itself, we strongly recommend that after installation, the engine’s ECU (Electronic Control Unit) performs a “cylinder balance” or “injector quantity adaptation” procedure. This is a standard step in modern common rail systems to ensure optimal performance and is typically done using a professional diagnostic tool.

Q3: What is the typical lifespan of this injector, and what maintenance can extend its life?
A: The lifespan can vary significantly based on fuel quality and operating conditions, but a high-quality new injector like this can typically last 4,000 to 8,000 hours. To maximize its life, we recommend the following: 1) Always use high-quality, clean diesel fuel from a reputable source. 2) Replace your fuel filters at the manufacturer’s recommended intervals. 3) Regularly drain water from the fuel/water separator. Contaminated fuel is the primary cause of injector failure.

Our advantages

1.An authorized wholesaler of Isuzu genuine parts, Hino genuine parts, Mitsubishi genuine parts and Mahle parts.

2. We are not only supply genuine parts, but also high quality OEM parts, which are made in China or made in Japan.

3. More than 10 years of experience in machinery parts, professional supply of diesel engine parts.

4. Fast delivery, the fastest can be shipped in one day ,more than 500,000 of different types parts in stock.

5. Scientific ERP system, easy and fast to locate the parts that customer needs.

6. Professional technician checks the parts before delivery, to make sure the parts are correct, usable and defect-free.

Exhibition

Packing&Shipping

1.  Our shipment is by air/sea/express (DHL/FEDEX/TNT/UPS/EMS).

2.  Once we get confirmation of payment, we will ship products in 2 days.

3.  Our packaging is standard export wooden box or others as your requirement.

4. We’ll check and test the products before shipping , and givethe pictures to our customers to confirm.

FAQ

Q1. What is your company major products?

A: Our main products are Liner kit, Piston, Rings, Liner, Gasket kit, Bearing, Injection pump, Nozzle, Water pump, Oil pump,Crankshaft, Turbocharger,Filter, etc.

Q2.What is the MOQ?

A: Normally we can supply any quantity if we have in stock.

Q3. What is your payment term ?

A: We accept Western Union, T/T, Paypal.

Q4. What is the packing ?

A: Carton or wooden case , If you want to put your logo on the packing , We will do it after get your authorization letter.

Q5. When can you deliver products after payment ?

A: By Express ,usually might take 3-4 days ;By Air , Usually take 7-9 days ; By Sea ,usually take 1-2 months .

Q6. What can you do to complete order perfectly ?

A: In the beginning , We will communicate with clients in details to understand what they need .

Before packing , We will check the products and send photos to clients .After confirmation ,

We will packing products well to avoid damage . Once we get tracking number ,

We will send it to customer and keep contact in with clients .