Product Overview

This high-quality remanufactured diesel fuel injector is engineered specifically for the Volvo MD13 Euro 5 engine platform. Designed to restore low-power performance and fuel efficiency, this injector is a direct replacement for OEM part numbers 3801469, BEBE4D25001, and BEBE4D25101. Our global supply chain ensures fast, reliable shipping to major industrial markets including North America, Europe, the Middle East, and Asia-Pacific, supporting heavy-duty trucking fleets and repair facilities worldwide.

Key Features & Benefits

• Restored Low-Power Performance: Specifically designed to address and resolve low-power issues in Volvo MD13 Euro 5 engines, restoring original torque and horsepower.
• Precision Remanufacturing: Each unit is disassembled, cleaned, inspected, and rebuilt using premium steel components to meet or exceed OEM specifications.
• Rigorous Testing: Every injector undergoes comprehensive flow rate, spray pattern, and pressure testing to ensure consistent fuel delivery and optimal combustion.
• Cost-Effective Solution: Offers significant savings compared to purchasing a brand-new OEM unit, without compromising on reliability or performance.
• Direct Fitment: Engineered for a seamless, plug-and-play installation with no modifications required, reducing downtime for your fleet.

Technical Specifications

OEM Cross-Reference

This injector is a direct replacement for the following original equipment manufacturer (OEM) part numbers:

• 3801469 (Volvo)
• BEBE4D25001 (Volvo)
• BEBE4D25101 (Volvo)

These part numbers are interchangeable and refer to the same injector design used in the Volvo MD13 Euro 5 engine series.

Compatibility

• Engine Model: Volvo MD13 (Euro 5 Emission Standard)
• Vehicle Applications: Volvo FH, FM, and other heavy-duty truck models equipped with the D13 engine platform (model years approximately 2012-2017 for Euro 5 variants).
• Engine Code: D13C, D13K (Euro 5 variants)

Important Note: Please verify your engine’s specific emission standard (Euro 5) and injector part number before ordering, as Euro 6 variants use different injector designs.

Global Supply & Distribution

We maintain a robust global logistics network to ensure prompt delivery to our B2B partners. Our standard shipping destinations include:

• North America: Major ports (Los Angeles, Houston, New York) and inland distribution hubs.
• Europe: Key ports (Rotterdam, Hamburg, Antwerp) and major industrial centers.
• Asia-Pacific: Singapore, Shanghai, Tokyo, and regional distribution points.
• Middle East & Africa: Dubai, Jeddah, and other major trade hubs.
• South America: Santos, Buenos Aires, and other key ports.

We offer flexible shipping options (sea, air, express) and can arrange door-to-door delivery for bulk or LCL/FCL container orders. Our export compliance team ensures all documentation is handled professionally for smooth customs clearance.

Quality Assurance

• Manufacturing Standards: Each injector is remanufactured in a controlled facility in Shandong, China, adhering to strict quality control processes.
• Testing: Every unit is tested for fuel flow rate, spray pattern consistency, and leak-free operation at operating pressures.
• Warranty: Backed by a 3-month warranty against manufacturing defects. We stand by the quality and reliability of our products.
• Packaging: Securely packed in neutral or OEM-style packaging to prevent damage during transit.

FAQ

Q1: Will this injector fit my Volvo FH truck with a 2014 D13 engine?

A1: It is compatible with Volvo D13 engines meeting Euro 5 standards, which typically covers model years around 2012-2017. However, we strongly recommend checking the part number stamped on your existing injector. If it matches 3801469, BEBE4D25001, or BEBE4D25101, this is the correct replacement. Always verify your vehicle’s VIN and emission standard (Euro 5) to ensure fitment.

Q2: What is the recommended installation procedure for this remanufactured injector?

A2: Installation should be performed by a qualified diesel technician. Key steps include: 1) Disconnect the battery and relieve fuel system pressure. 2) Clean the injector bore thoroughly to prevent contamination. 3) Replace copper washers and O-rings (new ones are recommended). 4) Tighten the injector clamp to the manufacturer’s specified torque. 5) After installation, perform a leak test and program the injector codes into the engine ECU if required by your specific Volvo system. Failure to code the injector may result in poor performance.

Q3: What is the expected lifespan of this remanufactured injector?

A3: With proper installation and the use of clean, high-quality diesel fuel and regular fuel filter changes, a remanufactured injector can provide a service life comparable to a new OEM unit, often exceeding 200,000 to 300,000 miles. The 3-month warranty covers immediate defects. Longevity is heavily dependent on fuel quality and engine maintenance.

Our advantages

1.An authorized wholesaler of Isuzu genuine parts, Hino genuine parts, Mitsubishi genuine parts and Mahle parts.

2. We are not only supply genuine parts, but also high quality OEM parts, which are made in China or made in Japan.

3. More than 10 years of experience in machinery parts, professional supply of diesel engine parts.

4. Fast delivery, the fastest can be shipped in one day ,more than 500,000 of different types parts in stock.

5. Scientific ERP system, easy and fast to locate the parts that customer needs.

6. Professional technician checks the parts before delivery, to make sure the parts are correct, usable and defect-free.

Exhibition

Packing&Shipping

1.  Our shipment is by air/sea/express (DHL/FEDEX/TNT/UPS/EMS).

2.  Once we get confirmation of payment, we will ship products in 2 days.

3.  Our packaging is standard export wooden box or others as your requirement.

4. We’ll check and test the products before shipping , and givethe pictures to our customers to confirm.

FAQ

Q1. What is your company major products?

A: Our main products are Liner kit, Piston, Rings, Liner, Gasket kit, Bearing, Injection pump, Nozzle, Water pump, Oil pump,Crankshaft, Turbocharger,Filter, etc.

Q2.What is the MOQ?

A: Normally we can supply any quantity if we have in stock.

Q3. What is your payment term ?

A: We accept Western Union, T/T, Paypal.

Q4. What is the packing ?

A: Carton or wooden case , If you want to put your logo on the packing , We will do it after get your authorization letter.

Q5. When can you deliver products after payment ?

A: By Express ,usually might take 3-4 days ;By Air , Usually take 7-9 days ; By Sea ,usually take 1-2 months .

Q6. What can you do to complete order perfectly ?

A: In the beginning , We will communicate with clients in details to understand what they need .

Before packing , We will check the products and send photos to clients .After confirmation ,

We will packing products well to avoid damage . Once we get tracking number ,

We will send it to customer and keep contact in with clients .