Product Overview

This high-precision Fuel Injection Pump Head Rotor, identified by the OEM part number 1 468 336 614 (also cross-referenced as 1468336614), is a critical component for VE-type diesel fuel injection systems. Manufactured to exacting standards, this head rotor is designed for direct replacement and repair, ensuring optimal fuel metering and injection timing. We serve a global clientele, with major markets spanning North America, Europe, Southeast Asia, the Middle East, and South America, providing reliable supply chains for automotive and industrial diesel engines.

Key Features & Benefits

• Precision Engineering: Manufactured from high-speed steel (HSS) for superior wear resistance and longevity under high-pressure operating conditions.
• OEM Standard Fitment: Direct replacement for the OEM part numbers 1 468 336 614 and 1468336614, ensuring seamless compatibility with VE-type pumps.
• Enhanced Durability: Designed to withstand the rigorous demands of continuous diesel engine operation, reducing downtime and maintenance intervals.
• Stable Performance: Critical for maintaining correct fuel injection pressure and timing, leading to improved engine efficiency, power output, and reduced emissions.
• Cost-Effective Repair: A reliable alternative to purchasing a complete injection pump, offering an economical solution for pump overhaul and repair.

Technical Specifications

OEM Cross-Reference

This rotor head is a direct replacement for the following OEM and reference numbers:

• OEM Number: 1 468 336 614
• Cross Reference: 1468336614
• System Type: Bosch VE-Type Fuel Injection Pump

Note: Always verify compatibility by comparing the part number with your existing pump components.

Compatibility

This head rotor is specifically designed for use in Bosch VE-type rotary injection pumps. These pumps are commonly found on a wide range of diesel engines, including:

• Engine Models: Various 4-cylinder and 6-cylinder diesel engines from manufacturers like Isuzu, Mitsubishi, Ford, Toyota, and other industrial engine builders.
• Vehicle Applications: Diesel cars, light trucks, agricultural tractors, and industrial machinery equipped with VE-type pumps.
• Year Ranges: Primarily used in engines manufactured from the 1990s through the mid-2000s, depending on the specific application.

Global Supply & Distribution

We offer comprehensive logistics solutions to meet the demands of the international B2B market:

• Worldwide Shipping: Capable of shipping to any major port or industrial hub globally.
• Major Markets Served: North America (USA, Canada, Mexico), Europe (Germany, UK, Netherlands, Poland), Asia-Pacific (Australia, Japan, South Korea, India), Middle East (UAE, Saudi Arabia), and South America (Brazil, Argentina).
• Fast Delivery: Efficient processing and shipping to ensure minimal lead times for urgent repair needs.
• Trade Compliance: Experienced in international export documentation and customs clearance.

Quality Assurance

We are committed to delivering high-quality components that meet or exceed industry standards:

• Manufacturing Standards: Produced in ISO-certified facilities with strict quality control processes.
• Material Integrity: Made from high-speed steel to ensure hardness, wear resistance, and dimensional stability.
• Testing: Each rotor head undergoes dimensional and surface finish checks to ensure perfect fitment and function.
• Warranty: Backed by a 4-month warranty against manufacturing defects.

FAQ

1. How do I confirm if this rotor head (1 468 336 614) is correct for my pump?
To confirm fitment, you must visually inspect your current pump’s rotor head for the stamped part number (1 468 336 614 or 1468336614). This part is specific to Bosch VE-type pumps. If your pump is a different type (e.g., VP44 or inline), this part will not be compatible. Always compare the number on your old part before ordering.

2. What are the critical installation steps for a VE pump rotor head?
Installation requires specialized knowledge of diesel injection systems. Key steps include: ensuring absolute cleanliness to prevent contamination, correctly aligning the drive slot and timing marks, lubricating the rotor with clean diesel fuel or assembly oil, and torquing the retaining nut to the manufacturer’s specification. Incorrect installation can lead to pump failure or engine damage. Professional installation is highly recommended.

3. What is the typical lifespan of this rotor head, and what causes failure?
The lifespan varies based on fuel quality, engine operating conditions, and maintenance. A high-quality rotor head can last for thousands of hours. Common causes of failure include: contaminated fuel (water or dirt), use of low-lubricity fuels, and excessive wear from high-mileage operation. Regular fuel filter changes are critical for maximizing the life of this component.

Our advantages

1.An authorized wholesaler of Isuzu genuine parts, Hino genuine parts, Mitsubishi genuine parts and Mahle parts.

2. We are not only supply genuine parts, but also high quality OEM parts, which are made in China or made in Japan.

3. More than 10 years of experience in machinery parts, professional supply of diesel engine parts.

4. Fast delivery, the fastest can be shipped in one day ,more than 500,000 of different types parts in stock.

5. Scientific ERP system, easy and fast to locate the parts that customer needs.

6. Professional technician checks the parts before delivery, to make sure the parts are correct, usable and defect-free.

Exhibition

Packing&Shipping

1.  Our shipment is by air/sea/express (DHL/FEDEX/TNT/UPS/EMS).

2.  Once we get confirmation of payment, we will ship products in 2 days.

3.  Our packaging is standard export wooden box or others as your requirement.

4. We’ll check and test the products before shipping , and givethe pictures to our customers to confirm.

FAQ

Q1. What is your company major products?

A: Our main products are Liner kit, Piston, Rings, Liner, Gasket kit, Bearing, Injection pump, Nozzle, Water pump, Oil pump,Crankshaft, Turbocharger,Filter, etc.

Q2.What is the MOQ?

A: Normally we can supply any quantity if we have in stock.

Q3. What is your payment term ?

A: We accept Western Union, T/T, Paypal.

Q4. What is the packing ?

A: Carton or wooden case , If you want to put your logo on the packing , We will do it after get your authorization letter.

Q5. When can you deliver products after payment ?

A: By Express ,usually might take 3-4 days ;By Air , Usually take 7-9 days ; By Sea ,usually take 1-2 months .

Q6. What can you do to complete order perfectly ?

A: In the beginning , We will communicate with clients in details to understand what they need .

Before packing , We will check the products and send photos to clients .After confirmation ,

We will packing products well to avoid damage . Once we get tracking number ,

We will send it to customer and keep contact in with clients .